Stator Rotor for Sawmill Motor

Stator Rotor for Sawmill Motor

Induction Asynchronous Sawmill Motor Stator Rotor silicon steel lamination, stator winding

Stator rotor lamination, winding armature for portable band sawmill
Stator rotor lamination, winding armature for portable band sawmill

The Glory of Taiwan: The history of Woodworking machines in Taiwan has been flourishing over 30 years. Besides, the exporting quantity of woodworking machines is the Top 3 in the world. Along with the development of furniture industry, the production of woodworking machines increases severely. The major feature of woodworking machines is small quantity with various designs. They are almost customized. The greatest strength is there are complete industrial settlements in Taiwan and be able to get the needed parts shortly. No matter massive production or unique customized products, we can provide short lead time, reasonable price, durable and reliable products. Those motors are popular with wood, bamboo and rattan industries. Furthermore, it can also be applied for cutting tiles and stones by designing high torque output.

Application:

  • The basic category of sawmills are eight main types as below, such as Ditch cutting machines, circular saws, wood planers, band saw machines, cutting machines, drilling machines, dust collector and all other DIY power machinery. Usually, 0.25HP~5HP are for single phase motors, and 0.25~20HP for three phases motors. The poles are 2~6 poles. Starting complicatedly and fluctuation load are the two major features of woodworking motors. Rotors are with special design to meet the demand of cutting status. For high speed cutting, there is always high RPM. Therefore, finding the solution of low vibration is the key point. With the low vibration, it can make the cutting surface smooth and lever up the accuracy. By the way, with the different purpose, some are looking for high RPM like cutting woods (2 poles design), some are looking for high torque like cutting tiles (6 poles design). Different poles involved in different design of stators rotors. TG11456, TG14075, and TG14080 are for 2 poles design. TG16088 is for 6 poles design.

Meet UL regulations:

  • Tayguei is a professional manufacturer of stator rotor lamination nearly 40 years. TG11456, TG14075, TG14080 and TG16088 are for sawmill motors. Most design is in order to reach high RPM, then it is 2 poles. They are standard sizes to fit in IEC (the International Electrotechnical Commission) regulations. Within IEC, there are standard frame numbers to let motor designers to refer to the related size of stator rotor. If your motor meet with IEC regulation, you can easily find the suitable stator rotor lamination from us.

Tolerance:

  • We can control the tolerance to make stator smooth and accurate. Please understand the tolerance differs from different material of silicon steel lamination and design of mold. Usually, it is within 0.03mm-0.05mm. Our material is directly from China Steel. As one of the leading silicon steel lamination manufacturer in the world, the quality of laminations is guaranteed, China Steel is also the supplier for Telsa Automotive in Taiwan. Certainly, there are different grades of laminations for choosing by various design.

IE3/IE4 Efficiency:

  • We are proud to claim that motors using our stator rotor passed the IE3/IE4 testing in UL laboratory. Our material is directly supplied from the top supplier, China Steel. With correct design and our rich experience on mold developing, we can guarantee the quality. We also have a subsidiary company for motor in Taiwan. We have the ability to develop new motor, and do the OEM/ODM business. As to the details, please contact us for further discussion. It would save time, if you could provide us with the drawing of stator rotor in advance. If you also need die aluminum casting, please also provide the drawing of your aluminum injection way.
Result 1 - 4 of 4
  • 114x56 mm Stator Rotor Lamination for Two Poles High Efficiency Motor - 114x56 mm Stator Rotor Lamination for Two Poles High Efficiency Motor
    114x56 mm Stator Rotor Lamination for Two Poles High Efficiency Motor
    TG11456

    TG11456 is mostly applied for industrial motors, water pump motors, blower motors, sawmill motors and high efficiency motors, especially great for pump motors. The stator outer diameter is 114 mm and the stator inner diameter is 56 mm. Most customers use it in four poles design with single phase or three phases induction motors, ranging from 0.5HP ~ 2HP. The slots of stator are 24T and the slots of rotor are 29T.The rotor OD is smaller than the stator ID after stamping – No-Gap design. So that you can save one machinery. The rotor is not needed to do the lathing after stamping.By using this stator rotor, you can reach low noise, long lifespan and low maintenance. Approved by IE2, IE3, and IE4 authentication.


  • 140x75 mm Stator Rotor Lamination for Two Poles and Six Poles High Efficiency Motor - 140x75 mm Stator Rotor Lamination for Two Poles and Six Poles High Efficiency Motor
    140x75 mm Stator Rotor Lamination for Two Poles and Six Poles High Efficiency Motor
    TG14075

    By using TG14075, you can reach low temperature, low current and high efficiency. This stator rotor is round shape and mostly applied for industrial motors, water pump motors and high efficiency motors. Water pump motors is the majority. The stator outer diameter is 140 mm and the stator inner diameter is 75 mm. Most customers use it in 2 poles design with single phase or three phases induction motors, ranging from 0.5HP ~ 2HP. It's suitable for the standard IEC frame no. 90L.The slots of stator are 24T and there are two types of rotors, one is with 18T for three-phase motor and the other is with 33T for single-phase motor. By the way, the rotor with 33T is with opening design to provide bigger torque. Applied with this stator rotor, you can reach low noise, long lifespan and low maintenance. Approved by IE2, IE3, and IE4 authentication.


  • 160x80 mm Stator Rotor Lamination for Two Poles Motor - 160x80 mm Stator Rotor Lamination for Two Poles Motor
    160x80 mm Stator Rotor Lamination for Two Poles Motor
    TG16080

    With 2 types of rotors for options, TG16080 is square shape and mostly applied for power wood tools, water pump motors, air compressors, and also used in cranes. The stator outer diameter is 160 mm and the stator inner diameter is 80 mm. Most customers use it in 2 poles design with single phase or three phases induction motors, ranging from 2HP ~ 3HP. It's suitable for the standard IEC frame no. 100L.The slots of stator are 24T and the slots of rotor are 16T or 34T (2 types). You can see the slot shape of rotor is very short to provide bigger torque. This stator rotor is perfect for power wood tools, especially for saw tables. By using this stator rotor, you can reach low noise, long lifespan and low maintenance. Approved by IE2, IE3, and IE4 authentication.


  • 160x88 mm Stator Rotor Lamination for Two Poles High Efficiency Motor - 160x88 mm Stator Rotor Lamination for Two Poles High Efficiency Motor
    160x88 mm Stator Rotor Lamination for Two Poles High Efficiency Motor
    TG16088

    With unique design of rotor, TG16088 is round shape and mostly applied for industrial motors, water pump motors, blower motors, sawmill motors and high efficiency motors. This model is better than TG16080. Customers use this stator rotor to make 2 poles, 2HP, 3-Phase motors can pass IE4 certification. Applied for 3HP motors, it can pass IE3.The stator outer diameter is 160 mm and the stator inner diameter is 88 mm. Most customers use it in 2 poles design with single phase or three phases induction motors, ranging from 2HP ~ 3HP, maximum 5HP. It's suitable for the standard IEC frame no. 100L.The slots of stator are 24T and the slots of rotor are 18T. There is a special design of rotor. There is an opening every 2 slots to provide better start-up. By using this stator rotor, you can reach low noise, long lifespan and low maintenance. Approved by IE2, IE3, and IE4 authentication.



Result 1 - 4 of 4

Menu

Best Sale

Over 30 Years Stator Rotor for Sawmill Motor Manufacturer | TayGuei

Located in Taiwan, TAYGUEI INDUSTRY CO., LTD., since 1984, is a Stator Rotor for Sawmill Motor manufacturer in stamping components industry. Stator rotor manufacturing for fan motor, industrial motor, water pump, high efficiency motor, gear motor, compressor motor, sawmill motor, blower motor, etc.

High efficiency stator rotor manufactured 0.03mm (30 µm) due to our masterwork on molds, sold to 15 countries, 60,000 tons of annual production, and stator and rotor for IEC and NEMA that can reach IE3 and IE4 high efficient motor. Stator and rotor supplies with punch from top-grade steel, precision meets 3µm, long service life, low power consumption, excellent efficiency and 3-week lead time.

TayGuei has been offering customers motors & stators, both with advanced technology and 34 years of experience, TayGuei ensures each customer's demands are met.


Hot Products

Stators and Rotors for Fan Motor

Stators and Rotors for Fan Motor

Widely applied for stand, wall and ceiling fan motors featuring low noise, high efficiency...

Read More
Motor Cores for Industrial Motor

Motor Cores for Industrial Motor

TayGuei motor cores conform to high efficiency motor products of IE3 even IE4. Could increase...

Read More
Rotors & Stators for Pump Motor

Rotors & Stators for Pump Motor

Our tolerance value is 3µm. We are strict on our quality assurance to reduce the energy...

Read More