Stator Rotor for Series Motor

Stator Rotor for Series Motor

Induction Asynchronous Series Motor Stator Rotor silicon steel lamination, rotor winding

Stator rotor lamination, motor core for series shunt wound motor stamping parts
Stator rotor lamination, motor core for series shunt wound motor stamping parts

Series motors are also called as DC brush motors. Series motor can connect current directly without any drivers. The stator will be replaced by magnets, and rotor will be wined with copper wires, normally it will be 2 pole, high RPM, low torque, and the out power is under 1HP. The RPM is not like other induction motors are fixed RPM. With increasing the load, the RPM will decrease to 300~3,000RPM, on the other hand, the RPM can increase to 15,000RPM. Normally, it has to equip with frequency converter to adjust the speed. (The larger frequency, the faster RPM).

Application:

  • Series motors can produce high starting torque while low speed and low starting torque while high speed. Mostly applied for power blenders, forklifts, elevators, trucks, and hoists. As to those one which are under 1HP, they are widely applied in fans, vacuum cleaners, sewing machines, blenders, hair dryers and portable drilling machines.

Features:

  • TayGuei has many types of stators and rotors that can be used in series motors. Series motors are DC motors. There are two windings which are in series with the same current flowing through each simultaneously. Usage of series motors is generally limited to heavy power demand in order to bring the machines up to speed. High starting torque and moving the large shaft are the features of series motors.

Tolerance:

  • We can control the tolerance to make stator smooth and accurate. Please understand the tolerance differs from different material of silicon steel lamination and design of mold. Usually, it is within 0.03mm-0.05mm. Our material is directly from China Steel. As one of the leading silicon steel lamination manufacturer in the world, the quality of laminations is guaranteed, China Steel is also the supplier for Telsa Automotive in Taiwan. Certainly, there are different grades of laminations for choosing by various design.

IE3/IE4 Efficiency:

  • We are proud to claim that motors using our stator rotor passed the UL energy certification. Our material is directly supplied from the top supplier, China Steel. With correct design and our rich experience on mold developing, we can guarantee the quality. We also have a subsidiary company for motor in Taiwan. We have the ability to develop new motor, and do the OEM/ODM business. As to the details, please contact us for further discussion. It would save time, if you could provide us with the drawing of stator rotor in advance. If you also need die aluminum casting, please also provide the drawing of your aluminum injection way.
Result 1 - 6 of 6
  • 54x29.4 mm Stator Rotor Lamination for Series Motor - 54x29.4 mm Stator Rotor Lamination for Series Motor
    54x29.4 mm Stator Rotor Lamination for Series Motor
    CD54294

    CD54294 is mostly applied for regular series motors, such as milling machines, cutting machines, juice blender, spinners and etc. If the RPM is below 6000, it will be DC type. When RPM is higher than 6000rpm, it will be AC type. The outer diameter of stator is 54mm and the outer diameter of rotor is 29.4mm. The slots of rotor are 10 slots. Approved by IE2, IE3, and IE4 authentication.


  • 67x35 mm Stator Rotor Lamination for Series Motor - 67x35 mm Stator Rotor Lamination for Series Motor
    67x35 mm Stator Rotor Lamination for Series Motor
    CD6735

    CD6735 is mostly applied for regular series motors, such as milling machines, cutting machines, juice blender, spinners and etc. If the RPM is below 6000, it will be DC type. When RPM is higher than 6000rpm, it will be AC type. The outer diameter of stator is 67mm and the outer diameter of rotor is 35mm. The slots of rotor are 12 slots. Approved by IE2, IE3, and IE4 authentication.


  • 73x41.22 mm Stator Rotor Lamination for Series Motor - 73x41.22 mm Stator Rotor Lamination for Series Motor
    73x41.22 mm Stator Rotor Lamination for Series Motor
    CD734122

    CD734122 is mostly applied for regular series motors, such as milling machines, cutting machines, juice blender, spinners and etc. If the RPM is below 6000, it will be DC type. When RPM is higher than 6000rpm, it will be AC type. The outer diameter of stator is 73mm and the outer diameter of rotor is 41.2mm. The slots of rotor are 12 slots. Approved by IE2, IE3, and IE4 authentication.


  • 88x48.1 mm Stator Rotor Lamination for Series Motor - 88x48.1 mm Stator Rotor Lamination for Series Motor
    88x48.1 mm Stator Rotor Lamination for Series Motor
    CD88481

    CD88481 is mostly applied for regular series motors, such as milling machines, cutting machines, juice blender, spinners and etc. If the RPM is below 6000, it will be DC type. When RPM is higher than 6000rpm, it will be AC type. The outer diameter of stator is 88mm and the outer diameter of rotor is 48.1mm. The slots of rotor are 12 slots. Approved by IE2, IE3, and IE4 authentication.


  • 94x53 mm Stator Rotor Lamination for Series Motor - 94x53 mm Stator Rotor Lamination for Series Motor
    94x53 mm Stator Rotor Lamination for Series Motor
    CD9453

    CD9453 is mostly applied for regular series motors, such as milling machines, cutting machines, juice blender, spinners and etc. If the RPM is below 6000, it will be DC type. When RPM is higher than 6000rpm, it will be AC type. The outer diameter of stator is 94mm and the outer diameter of rotor is 53mm. The slots of rotor are 16 slots. Approved by IE2, IE3, and IE4 authentication.


  • 100x54 mm Stator Rotor Lamination for Series Motor - 100x54 mm Stator Rotor Lamination for Series Motor
    100x54 mm Stator Rotor Lamination for Series Motor
    CD10054

    CD10054 is mostly applied for regular series motors, such as milling machines, cutting machines, juice blender, spinners and etc. If the RPM is below 6000, it will be DC type. When RPM is higher than 6000rpm, it will be AC type. The outer diameter of stator is 100mm and the outer diameter of rotor is 54mm. The slots of rotor are 16 slots. Approved by IE2, IE3, and IE4 authentication.



Result 1 - 6 of 6

Menu

Best Sale

Over 30 Years Stator Rotor for Series Motor Manufacturer | TayGuei

Located in Taiwan, TAYGUEI INDUSTRY CO., LTD., since 1984, is a Stator Rotor for Series Motor manufacturer in stamping components industry. Stator rotor manufacturing for fan motor, industrial motor, water pump, high efficiency motor, gear motor, compressor motor, sawmill motor, blower motor, etc.

High efficiency stator rotor manufactured 0.03mm (30 µm) due to our masterwork on molds, sold to 15 countries, 60,000 tons of annual production, and stator and rotor for IEC and NEMA that can reach IE3 and IE4 high efficient motor. Stator and rotor supplies with punch from top-grade steel, precision meets 3µm, long service life, low power consumption, excellent efficiency and 3-week lead time.

TayGuei has been offering customers motors & stators, both with advanced technology and 34 years of experience, TayGuei ensures each customer's demands are met.


Hot Products

Stators and Rotors for Fan Motor

Stators and Rotors for Fan Motor

Widely applied for stand, wall and ceiling fan motors featuring low noise, high efficiency...

Read More
Motor Cores for Industrial Motor

Motor Cores for Industrial Motor

TayGuei motor cores conform to high efficiency motor products of IE3 even IE4. Could increase...

Read More
Rotors & Stators for Pump Motor

Rotors & Stators for Pump Motor

Our tolerance value is 3µm. We are strict on our quality assurance to reduce the energy...

Read More