90x50 mm Stator Rotor Lamination for Two Poles High Efficiency Motor
motor core, motor rotor, pump rotor
TG9050 is round-shape stator rotor / motor core and mostly applied for water pump motors and submersible pump motors. TG9050 is accordance with the international pump motor standard. The stator outer diameter is 90 mm and the stator inner diameter is 50 mm.
There are two types of rotors. Both rotors are with 18 slots, but the shape of slots are different. One is for submersible pumps to insert copper rods, so the slots are bigger. The other is for aluminum die-casting with an opening on each slots to provide better start-up.
Most customers use this stator rotor it in 2 poles design with single phase or three phases induction motors, ranging from 0.25HP ~ 1HP. The slots of stator are 24T and the slots of rotor are 18T. By using this stator rotor, you can reach low noise, long lifespan and low maintenance. Approved by IE2, IE3, and IE4 authentication.
Our silicon steel lamination coils, non-oriental type, are all directly from China Steel Corporation (CSC), China Steel is also the supplier for Telsa Automotive in Taiwan. There are several grades for choices, such as 50CS1300, 50CS800, 50CS600, 35CS470, and 35CS550...etc. 50CS1300 is widely used for making industrial motors. The iron loss is so low only 5.88 W15/50. Industrial motors applied with 50CS1300 is able to pass IE3 high efficiency testing. 50CS1300 is good enough for model TG10870, furthermore, customers can cost down by using 50CS1300.
By the way, if you want to know more about the iorn loss level,please kindly check Table 7: Typical electrical and magnetic properties of General and High Frequency Products. This table is quoted from China Steel Cooperation.
By the way, if you want to know much more of steel lamination, you can find the relative material grade table in our website.
TayGuei use the Progressive Mold/Die to punch/stamp all the stators & rotors. The mold is is made of Tungsten steel. The tolerance is 0.03 mm, and it can stamp 100 million times with lifetime warranty.
We have a professional team to design, make and do the maintenance of molds. If your mold/die is customized by us. We provide life time service for free. The lead time of customized mold is about 3 months with final approval sample included (FA sample).
Furthermore, we provide "Stepping Mold" for customer to do samll quantity production. We also provide " Laser cutting samples" for customers to check the design first before developing the mold. By doing so, they can figure out the problems (if any) in advance. Once they confirm the design by laser-cutting samples, they can proceed the mold developing.
With our rich experience on stators and rotors, we are able to provide you customization service if you need any change. Certainly, we can also support you to develop new prototype motor. For existing products, our team can do the trouble shooting and provide you best solution based on our 40-year experience. We even help our customers outsource the related components. You can do one-stop shop with us.
Below is the developing table of new motor. Please fill in it then reply to us when you have any demands about new motor project. This can save both of us time to communicate. If available, please provide us with the picture of the motor plate.
Some of our customers are looking for the service of"Winding". We have such service for sure but under a certain quantity. Please provide us with the winding data, such as wire type, wire diameter, coil numbers, coil weight…and so on. The fastest way is sending us one motor to evaluate then quote.
If you are planning to develop new fan motors,don't forget to send blades to us, too.
Interlock / Riveting:
Finally, please be advised that those stators and rotors are with interlock technology. With interlock, the production is much faster and precisely. We can set the desire SKEW (for rotor) first. Then stators and rotors are stacked up automatically while stamping/punching progress. Therefore, we can speed up the production speed and reach massive production quantity.
We can provide several ways of stacking – sheet, interlock & welding. Especially when the stacking height is over 80mm, we suggest customers to do welding to make the stator conject firmly.
Finally, we would like to talk about the screw holes on stators. Depending on the design of motor frame, we can fasten the stator via the screw holes or via ditches. Please mark if you need screw holes on your inquiry.
Aluminum die casting:
If you are looking for good quality aluminum die-casting, we are your top choice! Due to there are various kinds of shapes of aluminum die casting, please provide us the drawing or at least tell us the ring height. So that we are able to find the match one. Normally single phase motor is with 3mm~7mm aluminum ring, and three phase motor is with 7~15mm aluminum ring.
Pure aluminum die-casting and aluminum alloy die-casting are available. The material of our aluminum is 99.8%. If your industrial motors need better torque, you can take in consider aluminum alloy die-casting.
Customized aluminum casting mold is provided. Please provide us with your drawing to evaluate the cost. As to the lead time, it will be around 21 working days.
Generally speaking, our orders are mostly CY/FCL shipment. Standard packing is cardboard boxes with wooden pallets. Our trade term is FOB Taichung Port. Certainly, we provide different trade term depending on our customer’s request, such as CIF, CAS, DDP and so on.
Regarding to the standard models, we accept small order quantity for stators and rotors – 500 sets or even less. Although we have safety stock for standard models, the stacking height and the SKEW differs from applications. Sometimes, customers may have to wait for production arrangement and the lead time will be around 21 days.
As to the package of CFS goods, it will be in wooden case to provide better protection during the transportation. All stators and rotors will be sprayed with anti-rusting oil before shipment, and sealed in boxes. VCI paper is optional for long time shipment, such as to South American and Europe.
Understanding it’s a long term to do a new motor development project, we provide free samples of stators and rotors for customer to test. Based on our 40-year experience, we could suggest customers the suitable stacking height, SKEW, even the winding data (project case only). As to the express freight, it will be covered by customer’s account number. You can choose Express – TNT, DHL, FedEx / Air parcel depending on your needs.
If you find the suitable stator and rotor from our website, please feel free to contact us for free samples. The lead time of samples is 21 days after confirming the specification, such as SKEW, material grade, die-casting type, shaft hole and so on. Please notice our standard lamination material grade is 50CS1300.
What if there is no corresponding stator and rotor for you, we also provide laser-cutting or stepping mold samples. The molds and samples are charged and will return the fee from the first trial order. Please contact us to get the table of sampe demand, we need to clarify your needs first then prepare your samples accordingly.
- ID #: TG9050
- Dimension: 90 x 50
- Stator: 90
- Rotor: 50
- Stator Slots: 24T
- Rotor Slots: 18T
- Shaft Hole: 22 / 28
- Material Width: 92W
- Efficiency: IE3
- Voltage: 110V / 220V / 380V
- Frequency: 50HZ / 60HZ
- Pole: 2P
- Phase: 1Φ / 3Φ
- HP: <1HP
- Application: Water Pump
- Files Download
We list the most common dimensions in a table. Those stators rotors are public mold and applied widely. Please notice that the first two numbers stand for the OD of stator and the last two/three numbers stand for the OD of rotor. You can have a quick review to check if there is a suitable one for your demand. What if you do not find it? Don’t worry! Please contact us via email email@example.com to see if we have at hand.
This motor core is round shape and mostly applied for industrial motors, water pump motors, blower motors, sawmill motors and high efficiency motors. The outer diameter is 90 mm and the inner diameter is 50 mm. Most customers use it in four poles design with single phase or three phases induction motors, ranging from 0.25HP ~ 1HP. 2 types of rotor.
- Stator Rotor for Fan Motor
- Stator Rotor for Industrial Motor
- Stator Rotor for Water Pump
- Stator Rotor for High Efficiency Motor
- Stator Rotor for Gear Motor
- Stator Rotor for Compressor Motor
- Stator Rotor for Sawmill Motor
- Stator Rotor for Blower Motor
- Stator Rotor for DC Motor
- Stator Rotor for Shaded Pole Motor
- Stator Rotor for Series Motor
- Stator Rotor for Ceiling Fan Motor
- Stator Rotor for Other Motor
- Contact Us
- Are you a trading company or a manufacturer ?
- How many employees are there in your Overseas Department?
- What is your supply ability? How many products can you produce per week?
- How many stamping machines do you have? What specification of those stamping machines?
- What else machinery do you have?
- What is your process flow?
- What kind of certification do you have?
- What is your main products?
- Do you provide aluminum die casting on rotors?
- Do you provide copper winding? Or copper welding?
- What proceedures do you take to prevent rusting?
- What is the biggest and smallest size of your lamination?
- How to choose the material grade of silicon steel lamination for stators & rotors?
- Vacabulary & illustration of a motor.
- Sample / Package
- Payment / Shipment
- Do you provide the service of rotor balancing?
- What else accessories do you provide? Do you make shafts?
- We don't know the size of stator & rotor, but I have the motor plate to show the RPM, torque… Could you help us to find out the suitable stators & rotors?
- What is the cost of developing the mold? If our order quantity is not big, what else method can we take?
- Do you do stepping mold? Or laser cutting?
- If we want to develop new model of motors, what can you help us?
- Quality / Support
- Company Information
Over 30 Years 90x50 mm Stator Rotor Lamination for Two Poles High Efficiency Motor Manufacturer | TayGuei
Located in Taiwan, TAYGUEI INDUSTRY CO., LTD., since 1984, is a 90x50 mm Stator Rotor Lamination for Two Poles High Efficiency Motor manufacturer in stamping components industry. Stator rotor manufacturing for fan motor, industrial motor, water pump, high efficiency motor, gear motor, compressor motor, sawmill motor, blower motor, etc.
High efficiency stator rotor manufactured 0.03mm (30 µm) due to our masterwork on molds, sold to 15 countries, 60,000 tons of annual production, and stator and rotor for IEC and NEMA that can reach IE3 and IE4 high efficient motor. Stator and rotor with punch from top-grade steel, precision meets 3µm, long service life, low power consumption, excellent efficiency and 3-week lead time.
TayGuei has been offering customers motors & stators, both with advanced technology and 34 years of experience, TayGuei ensures each customer's demands are met.